Das Thema Kabel ist nicht unumstritten. Dabei kann man es ganz pragmatisch angehen: Gute Kabel ausprobieren und fertig.
>> Mehr erfahren>> Alle anzeigen
Man nehme einen Breitbänder, ein Gehäuse und lasse im Grunde alles weitere weg. Heraus kommt wahrscheinlich ein Lautsprecher, der nicht besonders gut klingt. Es sei denn, man weiß, was man tut.
>> Mehr erfahren>> Alle anzeigenKategorie: Profi- / Musiker-Equipment
Ausstattungsliste: Electro-Voice N8000
| Specification | |
| Type | Netmax 300 Mips Digital Matrix Controller |
| Weight Net | 7.37kg (16.25 lbs) |
| Depth | 381mm (15") |
| Width | 483mm (19.02") |
| Height | 88.1mm (3.47") |
| Sample Rate | 48 kHz internal |
| Data Format | 24 Bit linear A/D and D/A conversion, 48 Bit processing |
| Internal Processing | 2 DSPs Standard (150 MHz, 300 MIPS)1 DSP per Audio Module (100 MHz, 100 MIPS)DSP-1 Extension Module optional (+300 MIPS) |
| Power Consumption | 90 W max. (incl. 2 x AI-1, 2 x AO-1, 1 x CM-1 modules) |
| Network Interface | Ethernet-10/100 MBit/s, RJ-45 |
| CAN Bus Interface | 2 x RJ-45 |
| Serial Interface | 2 Ports, 9pin D-Sub female (Remote Control) |
| GPIO Control Ports | 2 x 6-pole Euro block4 Control Inputs (analog 0 - 10 V / logic control)3 Control Outputs (Relay contact to ground) 1 Fault Output (NC Relay contact) 3 Reference Outputs (+5 V / +10 V/ GND) |
| Cooling | Left-to-right, 3-stage fan |
| Audio Network | CobraNet CM-1 Module (optional) |
| FIR-Drive | Yes |
| Total Harmonic Distortion | 0.005% |
| Signal-to-Noise Ratio (A-weighted) | 115dB |
| Power Supply | 100 - 240 VAC, 50/60 Hz |
| Network Control (IRIS-Net) | Yes |



